Manesar is one of India's most concentrated automotive manufacturing zones — vehicle assembly, forging and casting, stamping, and hundreds of component units feeding the big plants. The instrumentation is heavy-duty and unforgiving: hydraulics, furnaces, presses and test rigs that run around the clock.
IMT Manesar is built around the automotive industry — vehicle assembly, forging and casting, stamping and machining, and a dense ecosystem of Tier-1 and Tier-2 component makers. The duty here is heavy and continuous: hydraulic power packs and presses, heat-treatment and forging furnaces, paint-shop ovens, test rigs and utility systems, all running to takt time where a stopped instrument can stop a line.
That is exactly the duty we build for. Glycerine-filled hydraulic gauges with snubbers that survive press spikes; furnace and heat-treatment thermocouples with the right sheath and well for the atmosphere; paint-shop and oven temperature control; test-rig pressure instruments; and transmitters where a line runs on 4–20 mA. Auto plants also run tight quality systems, so calibration with traceable certificates and scheduled recalibration is not optional — it is part of the supply.
Our works is in Faridabad, about twenty-five kilometres away and in the same state. For Manesar that means genuinely fast supply — next working day for stock, same-day possible for an emergency, engineers on site quickly, and clean intra-state CGST + SGST invoicing. On a takt-time line, being that close is worth more than any catalogue.
IMT Manesar is one of our closest same-state supplies:
Vehicle assembly and large plants — hydraulic and process gauges, transmitters, furnace thermocouples and calibrated instruments to quality systems.
Heat-treatment and forging furnaces — high-temperature thermocouples with ceramic wells and high-pressure hydraulic gauges.
Press power packs — glycerine-filled gauges with snubbers, pressure switches and test-rig instrumentation.
Machining, plating and sub-assembly — utility and hydraulic gauges, plating-line temperature control and air-line instrumentation.
Curing and paint ovens — temperature sensors and control, pressure and airflow instruments.
Compressed air, chilled and hot water — pressure gauges, DP transmitters and temperature sensors.
Auto duty is heavy, continuous and quality-audited. These are the Manesar sectors we specify for.
Hydraulic and process gauges, transmitters, utility instrumentation and calibrated measurement to plant quality systems.
High-temperature furnace thermocouples with ceramic protection tubes and high-pressure hydraulic gauges.
Glycerine-filled press gauges with snubbers, pressure switches and test-rig instruments that survive spikes.
Utility and hydraulic gauges, coolant and plating-line instruments, and air-line measurement.
Oven and curing temperature control, high-accuracy sensors and pressure/airflow instruments.
Compressed-air and chilled-water gauges, DP transmitters and temperature sensors for plant utilities.
Everything below is manufactured, ranged and calibrated at our Faridabad works and delivered to Manesar on the terms shown further down this page.
| Category | What it covers | |
|---|---|---|
| Pressure Gauges & Switches | Glycerine-filled Bourdon tube gauges with snubbers for press and hydraulic duty, diaphragm sealed and differential gauges, and adjustable pressure switches. | View range → |
| Pressure & DP Transmitters | VIPL-PT-200 and VIPL-DPT-200, 4–20 mA / HART, ±0.075% accuracy, for process, hydraulic and utility loops. | View range → |
| Temperature Sensors & Gauges | RTD Pt100, thermocouples (J/K/R/S), forging and heat-treatment furnace assemblies, paint-oven sensors, thermowells and transmitters. | View range → |
| Calibration & Service | Traceable bench and on-site calibration, quality-system-ready certificates, scheduled recalibration and annual maintenance contracts. | View range → |
If you are not sure which instrument suits your duty, send us the media, the working pressure or temperature, the process connection and the environment on WhatsApp. We will size it — and if a cheaper instrument would do the job, we will tell you that too.
Most instrument failures are not manufacturing defects — they are specification mistakes. These are the ones we see most often in Manesar.
Press power packs spike the gauge on every stroke. A dry gauge dies in months; a glycerine-filled gauge with a snubber, ranged to two-thirds of scale, lasts years and holds a steady reading a QA auditor can trust.
Forging and heat-treatment furnaces destroy the well before the wire. Match the sheath and ceramic protection to the atmosphere and temperature, and the thermocouple stops being a line-stopping consumable.
Auto plants audit measurement. Every instrument needs a traceable certificate and a recalibration schedule. Buy the instrument and the paper together, and audits stop being a scramble.
Curing and heat-treatment windows are tight. A drifting sensor pushes a batch out of specification. Correctly-specified, calibrated sensors that hold accuracy protect the process and the yield.
On a takt-time line, an instrument that fails is minutes of lost production per minute of downtime. Same-state, next-day (or same-day emergency) supply from twenty-five kilometres away is not a convenience — it is uptime insurance.
A stamping supplier in IMT Manesar was losing occasional production time on a press whose hydraulic gauge kept failing. Each failure meant a stop while a gauge was found and fitted, and the plant had accepted it as a cost of running presses, keeping cheap gauges in stores and swapping them as needed.
Watching the press cycle made the cause obvious: severe pressure spikes on every stroke, hammering a dry, unsnubbed gauge hundreds of times a shift. The cheap replacements were not the problem — the duty had never been specified. No dry gauge survives that, and each stop was avoidable.
We fitted glycerine-filled gauges with snubbers, ranged to two-thirds of scale, and calibrated them to certificate for the quality system. The gauge failures — and the shift-time they cost — stopped. The correct gauge cost a little more once; it saved far more in avoided downtime and lost production.
Manesar does not buy gauges — it buys uptime and audit-clean measurement. A gauge that fails on a press, a thermocouple that dies in a forging furnace, a sensor that drifts out of a heat-treatment window: each of these is not a spare-parts line, it is lost production and a quality risk. The value of specifying an instrument correctly and calibrating it properly is measured in shifts that ran and audits that passed, not in the price of the box.
Being twenty-five kilometres away in the same state is part of that value. When something does fail, an engineer and a replacement reaching the line in hours — not days from another state — is the difference between a hiccup and a stoppage.
Stock instruments to IMT Manesar next working day, same-day possible for emergencies.
Traceable certificates and scheduled recalibration for auto quality systems.
Engineers on the line quickly — same-state, twenty-five kilometres away.
Intra-state Haryana invoicing, e-invoiced with IRN.
Instrumentation supply, calibration and service across the region.
Vedika Instruments supplies IMT Manesar's automotive belt — vehicle assembly, forging and casting, stamping and the Tier-1/Tier-2 component ecosystem. The duty is heavy and continuous: hydraulics, furnaces, presses, paint ovens and test rigs running to takt time, audited by tight quality systems. We supply the instruments that survive it — filled hydraulic gauges with snubbers, furnace thermocouples with the right protection, accurate paint and heat-treatment sensors, and transmitters for 4–20 mA loops — all calibrated with traceable certificates and scheduled recalibration.
Our works is twenty-five kilometres away in the same state, which for a takt-time plant is the real advantage: next-day (or same-day emergency) supply, engineers on the line in hours, and clean intra-state CGST + SGST invoicing. In Manesar the instrument's job is to never be the reason a line stopped or an audit failed — and that is exactly what we build and support for.
Send a tag list, a datasheet or a photo of the instrument you are replacing. We will size it and quote it.
Get a quotation Call +91 98107 02836