Gurugram is two industrial cities in one — the auto-component and engineering belt of Udyog Vihar and IMT Manesar, and a dense corridor of commercial towers, data centres and hotels whose plant rooms run on the same instruments a factory does.
Most instrument suppliers treat Gurugram as one market. It is really two. On one side is the manufacturing belt — Udyog Vihar, IMT Manesar, and the auto and electronics units feeding the big assembly plants — which needs hydraulic gauges, furnace thermocouples, air-line instrumentation and pressure switches, the same as any engineering town. On the other side is the commercial corridor: office towers, malls, hotels, hospitals and data centres, every one of which has a basement full of chillers, pumps, boilers and pressurisation systems that are measured and controlled exactly like a small process plant.
We supply both. For the factories, that means gauges and sensors specified to the duty and delivered next working day on a Haryana invoice. For the building-services side, it means the instruments a BMS actually reads — pressure and DP transmitters across chilled-water headers and filters, temperature sensors in ducts and pipes, and gauges on pump sets and expansion systems — supplied to the ranges and outputs your controls contractor has specified.
Because our works is in Faridabad, about forty kilometres away and in the same state, Gurugram is a next-day, intra-state supply for us. That matters more than it sounds: a chiller plant tripping on a Friday, or a paint-line gauge failing before a shipment, is a problem measured in hours, and being one state and one short drive away is the difference between fixing it and waiting for it.
Gurugram is a next-working-day, same-state supply for us:
The original engineering and export belt — utility and hydraulic gauges, pressure switches, air-line instrumentation and fast replacements.
Auto, electronics and heavy engineering. Furnace thermocouples, press gauges, transmitters and panel instrumentation.
Commercial plant rooms — chilled-water DP transmitters, pump gauges, duct and pipe temperature sensors for BMS.
Newer mixed-use and industrial units — HVAC instrumentation, boiler gauges and water-treatment instruments.
General engineering and job work — utility gauges, compressed-air instrumentation and pressure switches.
Precision cooling and critical utilities — DP monitoring across filters, temperature sensors and pressure instruments with 4–20 mA outputs.
A chiller plant room and a forging shop need very different instruments. These are the Gurugram sectors we specify for.
Hydraulic press gauges with snubbers, furnace thermocouples, air-line gauges and pressure switches for presses and test rigs.
Chilled-water and hot-water DP transmitters, duct/pipe temperature sensors, pump and expansion-tank gauges, pressurisation instruments.
Precision-cooling DP transmitters, filter differential monitoring, temperature sensors and 4–20 mA pressure instruments for critical plant.
Boiler and steam gauges with siphons, hot-water and HVAC instrumentation, and medical-gas line pressure gauges.
Clean-utility gauges, diaphragm sealed instruments for dosing lines, and temperature control on process ovens.
Level transmitters, DP gauges across filters, dosing instrumentation with corrosion-resistant wetted parts.
Everything below is manufactured, ranged and calibrated at our Faridabad works and delivered to Gurugram on the terms shown further down this page.
| Category | What it covers | |
|---|---|---|
| Pressure Gauges & Switches | Bourdon tube, diaphragm sealed, capsule and differential gauges (IDQ series, EN 837), plus adjustable pressure switches for pump and plant control. | View range → |
| Pressure & DP Transmitters | VIPL-PT-200 and VIPL-DPT-200, 4–20 mA / HART, ±0.075% accuracy — for process lines and BMS chilled-water/filter DP duty. | View range → |
| Temperature Sensors & Gauges | RTD Pt100, thermocouples, bimetal gauges, duct and immersion sensors, thermowells and head-mounted transmitters. | View range → |
| BMS & Utility Instruments | Duct and pipe sensors, DP switches and transmitters, and gauges ranged and calibrated to your controls contractor's schedule. | View range → |
If you are not sure which instrument suits your duty, send us the media, the working pressure or temperature, the process connection and the environment on WhatsApp. We will size it — and if a cheaper instrument would do the job, we will tell you that too.
Most instrument failures are not manufacturing defects — they are specification mistakes. These are the ones we see most often in Gurugram.
Chilled-water DP across a coil might be a fraction of a bar; a pump header might be several bar. A transmitter ranged for the wrong span gives the BMS a signal that is either noisy or flat. Give us the actual working span, not the pipe rating, and the loop behaves.
Continuous condensation and treated water will pit ordinary internals over time. Choose SS316 wetted parts and, on aggressive dosing lines, a diaphragm seal — it is far cheaper than re-instrumenting a plant room every couple of years.
IMT and Udyog Vihar presses hammer a gauge exactly like anywhere else. Glycerine-filled gauges with snubbers, ranged to two-thirds of scale, are the difference between a gauge that lasts years and one you replace each quarter.
Precision cooling depends on instruments that hold calibration. Uncalibrated or oversized transmitters let the plant hunt, which wastes energy and stresses compressors. Calibrated, correctly-ranged instruments with certificates are not a luxury in a data centre — they are the design.
Gurugram is Haryana, same as our works. Intra-state CGST + SGST invoicing means simpler input-credit reconciliation than an out-of-state purchase — a small thing that your accounts team will thank you for.
A commercial tower in the Cyber City belt was reporting persistent cooling complaints on its upper floors. The facilities team suspected undersized chillers and were preparing a costly proposal to add capacity. Before that, they asked us to check the instrumentation the BMS was reading.
We found the chilled-water DP transmitters across the main coils ranged for a span several times larger than the actual differential. The BMS was reading the bottom few percent of each transmitter's range — a signal so compressed that the controls could not modulate the valves accurately. The plant was not short of cooling; it was flying blind.
We replaced the transmitters with units ranged to the real working DP and calibrated them to certificate. The BMS regained resolution, the valves modulated properly, and the upper-floor complaints stopped — without adding a single kilowatt of chiller capacity. The fix cost a fraction of the proposed plant upgrade.
Gurugram gets sold a lot of instrumentation it does not need, in both its halves. A factory gets quoted a premium transmitter where a filled gauge and a snubber would have solved the problem; a plant room gets told it needs more plant when it actually needs its existing instruments ranged and calibrated properly. Our answer is the same to both: tell us the duty, and if the cheaper fix is the right fix, that is the one we will quote.
That is easier to promise when your works, stock and calibration bench are forty kilometres away in the same state, because we would rather keep a Gurugram customer for a decade of correct, well-specified supply than win one oversized order and lose the relationship.
Stock instruments across Gurugram and Manesar the next working day.
Transmitters and sensors ranged and calibrated to your controls schedule.
Breakdown and commissioning visits across Gurugram, same-state and close.
Intra-state Haryana invoicing, e-invoiced with IRN.
Instrumentation supply, calibration and service across the region.
Vedika Instruments supplies Gurugram in both its forms — the auto and engineering belt of Udyog Vihar and IMT Manesar, and the commercial corridor of towers, hotels, hospitals and data centres whose plant rooms run on the same instruments a factory does. For the factories we supply gauges, switches, sensors and transmitters specified to the duty; for the building-services side we supply the instruments a BMS actually reads — chilled-water and filter DP transmitters, duct and pipe temperature sensors, pump and pressurisation gauges — ranged and calibrated to the controls schedule.
Because our works is forty kilometres away in the same state, Gurugram is a next-day, intra-state supply with clean CGST + SGST invoicing and engineers who can reach the site quickly. And because we manufacture and calibrate what we sell, the advice is consistent whether you are a plant or a facilities team: tell us the real duty, and the correct instrument — often the cheaper one — is what we will quote.
Send a tag list, a datasheet or a photo of the instrument you are replacing. We will size it and quote it.
Get a quotation Call +91 98107 02836