Vedika Instruments has manufactured process instrumentation and packing machinery in Faridabad, India for over nine years. What we ship to Saudi Arabia is built on the same line, to the same drawings, with the same calibration discipline as what we supply to an Indian refinery — there is no export-grade and domestic-grade version of anything we make.
The commercial case for Indian supply into Saudi Arabia is straightforward. Indian manufacturing cost is materially lower than European or Japanese equivalents while the applicable standards — EN 837 for gauges, IEC 60751 for resistance thermometers, the usual accuracy and IP norms for transmitters — are the same standards, not a local substitute. Sea freight from Nhava Sheva and Mundra is short by international standards — around two weeks for a typical consignment — and our working day overlaps enough with yours that a specification question asked in the morning is usually answered the same day.
Equally important for an overseas buyer: a wrong instrument is not a small problem. Returning a mis-specified transmitter across a border costs more than the transmitter. So we build to the datasheet rather than to a catalogue approximation, we certify and document precisely, and we check the paperwork before the crate leaves — because paperwork that does not match the goods is the single most common reason a shipment sits at a port.
EN 837 gauges, IEC 60751 Class A sensors, transmitters to international accuracy and IP norms — with the certificate to prove each one.
Certificate of Origin, MTC, traceable calibration, packing list and invoice prepared to match the goods exactly.
Sea and air freight to Jeddah Islamic Port, King Abdulaziz Port Dammam, King Abdullah Port and air freight into Riyadh, Jeddah and Dammam — FOB, CFR or CIF as your terms require.
Process instrumentation and packing & sealing machinery from the same works — one PO, one shipment, one point of contact.
Two separate demand curves matter to us, and both are rising.
Packing and sealing machinery. The Saudi packaging machinery market was estimated at about US$552.4 million in 2025, and is forecast to reach roughly US$779.1 million by 2034 — a compound growth rate of about 3.90 per cent across 2026–34 (IMARC Group). The drivers are the ones you would expect in a diversifying economy: a food and beverage sector expanding with a growing middle class, pharmaceutical manufacturing being localised, personal-care and chemical production scaling up, and an e-commerce market that has changed what a carton has to survive.
Process instrumentation and automation. The Saudi process automation and instrumentation market is projected to grow at about 7.6 per cent CAGR across 2026–32 (6Wresearch), driven by Vision 2030 industrialisation. Downstream petrochemical capacity at Jubail, Yanbu and Jazan, desalination and water treatment expansion, the King Salman Energy Park, and the giga-projects — NEOM, Red Sea Global and the rest — all consume field instrumentation in volume, both for new build and for the replacement cycles that follow three to seven years later.
For an Indian manufacturer the significant number is not the growth rate but the import share. When over 80 per cent of advanced instrumentation is brought in from Europe, North America and East Asia, a supplier offering the same standard at Indian cost is not competing on price alone — it is competing on lead time, on willingness to build a small quantity to a specific datasheet, and on answering the phone.
Jubail, Yanbu, Jazan and Ras Tanura — pressure and DP transmitters, flameproof sensors, thermowells to project datasheet, remote-seal assemblies for hot and viscous service.
Level transmitters, magnetic flow meters, pressure gauges and switches, chlorination and dosing panel instruments for desalination plants and district networks.
Sanitary tri-clover RTDs, hygienic gauges, temperature controllers — plus strapping, carton sealing and wrapping machinery for the end of the line.
Clean room differential pressure monitors, validation kits, datalogging recorders for batch records, and hygienic sensors with polished wetted parts.
Boiler drum level gauges, steam-service thermowells, multi-channel scanners, annunciators and electrical measurement instruments.
BMS and HVAC sensors, clean-room instrumentation, GPS master clocks and panel instruments for NEOM, Red Sea and similar programmes.
| Category | Typical items exported |
|---|---|
| Pressure | Bourdon, diaphragm-seal, capsule, contact-type and differential gauges to EN 837; pressure switches; HART pressure and DP transmitters; remote-seal transmitters with capillary. |
| Temperature | Pt100 RTD assemblies to IEC 60751 Class A; mineral-insulated, quick-disconnect, sanitary and flameproof variants; thermocouples types J/K/T/R/S/B; bar-stock thermowells (threaded, flanged, weld-in); head, DIN-rail, field and HART transmitters. |
| Level & flow | Radar, ultrasonic, hydrostatic and capacitance level transmitters; float, fork and conductivity switches; reflex, transparent and tubular gauges; electromagnetic, vortex, turbine and Coriolis flow meters; rotameters. |
| Control & panel | PID controllers (48×48 to 96×96, flameproof and field versions), scanners, indicators, signal isolators, dataloggers, paperless recorders, timers, annunciators, control panels. |
| BMS & clean room | Duct, wall, outdoor and handheld RH+T transmitters; clean-room differential pressure monitors; door interlock systems; wireless transmitter/receiver networks; GPS master clocks. |
| Packing & sealing | Fully automatic and semi-automatic PP strapping machines; semi-automatic, compact and random carton sealers; box wrapping machines with top press; hydraulic hand pallet trucks and drum carriers. |
The more of this you send with the enquiry, the closer the first quotation will be to the final one — and the less chance of a wrong instrument crossing a border.
Medium, working and design pressure, working and maximum temperature, and whether the service is clean, corrosive, viscous, slurry or crystallising.
Process connection size and thread standard (NPT / BSP / flanged with class), wetted material required — SS316L, Hastelloy, Monel, tantalum.
Safe area, or Zone 1 / Zone 2 with gas group and temperature class. Say which certification the project accepts — this decides both price and lead time.
4-20 mA, HART, Modbus RTU or TCP; local display required or not; SIL rating if the loop is part of a safety system.
Saudi summer ambient, direct solar exposure, sand and dust ingress, and washdown all change the housing and the IP rating we quote.
Incoterm (FOB, CFR, CIF), port of discharge, quantity and delivery schedule, and any inspection or third-party witnessing required.
Documentation is where an export order is won or delayed, and Saudi Arabia has its own requirements. Every consignment we ship carries a commercial invoice and packing list that match the goods line for line, a Certificate of Origin, material test certificates for wetted parts where the datasheet calls for them, and traceable calibration certificates for the instruments that need them.
SASO product registration and the SABER platform certificate of conformity are issued to the Saudi importer of record, not to the overseas manufacturer. We supply the complete technical file, test reports, declarations and photographs your importer or conformity assessment body needs, and coordinate with them directly until it is issued. We say this plainly rather than promising to "handle it", because a supplier who claims to issue a certificate they cannot issue is a supplier whose container gets held.
| Sea freight | From Nhava Sheva and Mundra to Jeddah Islamic Port, King Abdulaziz Port Dammam, King Abdullah Port and air freight into Riyadh, Jeddah and Dammam. Typical transit is around two weeks port to port, subject to sailing schedule. |
|---|---|
| Air freight | For urgent breakdown replacements — instruments are small and light, and air freight is often cheaper than the downtime it prevents. |
| Packing | Export-grade wooden crates with ISPM-15 heat treatment marking where required, moisture barrier and desiccant for electronics, cushioned gauge packing. |
| Incoterms | FOB, CFR and CIF quoted on request. Ex-works available where your freight forwarder collects. |
| Payment | Irrevocable letter of credit, and standard export terms as agreed. Advance and part-advance terms for smaller repeat orders. |
| Lead time | Quoted per order. Stock items ship quickly; project and engineered builds are scheduled and confirmed in writing before the PO is accepted. |
Standards we build to: EN 837-1 and EN 837-3 (Bourdon and capsule gauges), IEC 60751 (Pt100 / Pt1000 resistance thermometers, Class A / AA / 1⁄3 DIN), IEC 60584 (thermocouple types and tolerance classes), ASME PTC 19.3 TW (thermowell wake frequency calculation on request), IEC 61508 (SIL 2 rated transmitters where the loop requires it), and NAMUR NE43 failure signalling.
Certificates supplied with the consignment:
What we will not claim: we do not issue SASO / SABER certificates ourselves — those belong to the importer of record — and we do not quote a lead time we have not scheduled. Both are said in writing before the order is accepted.
Instrumentation and packing machinery exported across the Gulf and beyond.
Vedika Instruments manufactures process instrumentation and packing & sealing machinery in Faridabad, India, and exports both to Saudi Arabia. Gauges are built to EN 837, temperature sensors to IEC 60751, and transmitters to international accuracy and ingress norms — with material, calibration and export documentation prepared to match the goods. We supply plants and EPC contractors ordering to project datasheets across Riyadh, Jubail, Yanbu, Dammam, Jeddah, Jazan, Ras Al Khair and the King Salman Energy Park (SPARK), and distributors building a catalogue locally.
Indian manufacturing cost, a around two weeks sea transit and overlapping working hours make us a practical source for Saudi Arabia. Documentation is where an export order is won or delayed, so we prepare it to match the goods line for line and raise any SASO / SABER requirement at quotation stage rather than at shipment. Send a tag list, a datasheet or a photograph of the instrument you are replacing, and we will size it, quote it and document it properly.
Send a tag list, a datasheet or a photo of the instrument you are replacing. We will size it and quote it — FOB, CFR or CIF.
Get a quotation Call +91 98107 02836