This is where we are. B-194, 2nd Floor, Green Field Colony — the instruments on this website are built here, and you are welcome to come and see.
Every other area page on this site describes somebody else's industrial belt. This one describes ours.
Vedika Instruments Pvt. Ltd. manufactures at B-194, 2nd Floor, Green Field Colony, Sector 41-42, Faridabad. The pressure gauges, RTD and thermocouple sensors, thermowells, controllers, panels and packing machines listed across this website are assembled, calibrated, tested and despatched from here.
Green Field Colony itself is a mixed commercial and light industrial pocket rather than a heavy manufacturing estate. The units around us are trading, service, assembly and small manufacturing businesses, along with the offices and workshops that serve the larger Faridabad sectors nearby.
We mention this plainly because a supplier who claims to be everywhere is usually nowhere. We are here, at a specific address, and that address is the reason our Faridabad service is different from our Panipat service.
You can walk in. Not an appointment, not a demonstration centre — the working premises. Bring the gauge that failed, the carton you need to seal, or the datasheet you have been sent. Most questions are settled faster across a bench than across email.
Collection instead of delivery. A sealing element, a spare blade, a replacement sensor — if you are nearby, you can collect it the same morning rather than waiting for a courier slot.
An engineer within the hour. For units in Sectors 41, 42, 31, 37 and the DLF area, a genuinely urgent breakdown gets an engineer the same day and frequently within the hour. We are not promising this across NCR; we are promising it here.
Calibration while you wait. For a single instrument, we can often calibrate at the bench and hand it back with the certificate rather than keeping it for days.
And an honest conversation. Being local means we will see you again. That is a stronger reason to give you accurate advice than any policy document.
Bourdon gauges, diaphragm seal assemblies, differential gauges, transmitters and switches — built and tested here against reference standards.
RTD and thermocouple sensors, mineral insulated assemblies, bar stock and fabricated thermowells, and head-mounted transmitters.
Level switches and transmitters, magnetic indicators, rotameters, PID controllers, scanners, recorders and panels wired and tested before despatch.
Against traceable reference standards, with as-found and as-left readings, ambient conditions and measurement uncertainty on every certificate.
Pressure instruments — Bourdon gauges, diaphragm seal assemblies, differential pressure gauges, pressure transmitters and switches, built and tested against reference standards on site.
Temperature instruments — RTD and thermocouple sensors, mineral insulated assemblies, bar stock and fabricated thermowells, head-mounted transmitters, and bimetal thermometers.
Level and flow instruments — level switches and transmitters, magnetic level indicators, reflex and transparent gauges, rotameters and flow switches.
Controllers and panels — PID controllers, multi-channel scanners, recorders, signal isolators, and control panels wired and tested here before despatch with as-built drawings.
Packing and sealing machinery — strapping machines, carton sealers, box wrapping machines, shrink tunnels, pallet trucks and drum handling equipment.
Calibration is done here against traceable reference standards, and every certificate carries as-found and as-left readings, the reference used, ambient conditions and the measurement uncertainty.
This is the practical advantage nobody else in NCR can offer a Faridabad customer, and it is worth using.
Bring your own cartons, your returnable bins or your bundles to the works. We will run them through the machine you are considering — the actual product, not a demonstration box — and you can watch the seal, the strap tension and the finish before you commit a rupee.
It settles the semi-automatic versus random question in ten minutes. It shows you exactly what tension does to your thin-wall bin. And it occasionally results in us telling you the smaller machine is enough, which is a conversation that is much harder to have over email.
Spares are held here too, against your original order reference, so the part matches the machine actually installed rather than a catalogue model number.
Run your actual product through the machine you are considering. It settles the semi-automatic versus random question in ten minutes.
Watch what the setting does to your thin-wall bin rather than reading about it. This is the argument that email cannot make.
Sealing elements, blades and wear parts held here against your original order reference.
Which is a conversation that is much easier across a bench than over email — and one we have regularly.
Starting a unit in Sector 41-42 or the surrounding sectors? Come and talk to us before you buy anything. We will tell you what instrumentation the process genuinely needs, what can wait, and what is being specified out of habit.
Already running nearby? The most useful thing we do for local units is calibration on a schedule rather than a scramble. Being minutes away, an annual calendar is easy to keep and costs very little.
Or just come and look. B-194, 2nd Floor, Green Field Colony, Sector 41-42. Monday to Saturday, 09:30 to 18:30. No appointment needed, and no obligation attached.
Yes, and we would encourage it. B-194, 2nd Floor, Green Field Colony, Sector 41-42, Faridabad, Monday to Saturday 09:30 to 18:30. No appointment is needed. Bring the failed instrument, your carton or the datasheet you have been sent.
Yes. Sealing elements, blades, sensors and most stock items can be collected the same morning if you are nearby, which is usually faster than any courier slot.
For units in Sectors 41, 42, 31, 37 and the DLF Industrial Area, a genuinely urgent breakdown gets an engineer the same day and frequently within the hour. We would not promise that across NCR, but we do promise it here.
For a single instrument, usually yes — calibrated at the bench against our reference standards and handed back with the certificate rather than kept for days.
Yes, and it is the fastest way to settle a machine choice. Bring your cartons, bins or bundles and we will run them through the actual machine so you can see the seal, the tension and the finish before committing.
We manufacture. Assembly, calibration, testing and despatch all happen at Green Field Colony, and the calibration is against traceable reference standards held here.
Everything on this site, but Sectors 41, 42, 31, 37, the DLF Industrial Area, Sector 6 and the NIT and Old Faridabad units are the ones where being a neighbour genuinely changes the service level.
Send a photograph of the nameplate, a tag list, or simply tell us the duty. Our engineer will size it and quote it.
Talk to an engineer on WhatsAppCall +91 98107 02836Email the specification